Job Vacancies

Job vacancies

Our high quality products are used across a diverse range of industrial sectors and we are looking for Skilled and Semi-skilled people to join our team.

PRODUCTION PLANNER

Clacton-on-Sea, Essex, UK

Salary negotiable depending on experience.
Permanent, full time office based position: 40hr week, + Pension.  In-house training.

Details of role:  We are looking for a Production Planner to join our existing team within our Semi-Finished Department at Ford Road, Clacton-on-Sea, Essex.  

Main duties:

• To plan and enter Work Orders into the Manufacturing System against Sales Orders, Internal    Orders and authorised Stock Levels. All Work Order loading will be in line with the availability of    raw materials, direct consumable items, and production capacity, i.e. labour and machines

• To purchase all direct consumable items when needed to manufacture the work loaded products

• To provide accurate Manufacturing Schedules for all the appropriate Production Departments

• To inform all appropriate Departments of any delay in the production and when to be back on  time

• To input all completed production data into the Manufacturing System to maintain the Scheduler

• To continually monitor the turnover of the authorised Stock Levels of the Semi-Finished  products

• To maintain the accuracy between the Manufacturing System stock figures and physical figures

• To provide cover for any other Production Planner as required or assist if it becomes necessary

 to continually monitor the turnover of the authorised Stock Levels of the Semi-Finished products

Key skills:  Ideally you will have some previous experience in process engineering within a manufacturing environment.  You will be methodical and well organised and have a reasonable level of computer competency.  Being a good communicator is essential since all tasks will require close collaboration with co-workers and other departments

If you are interested: Email your CV and covering letter to: steven.holden@dalau.com

______________________________________________________________________________

VENEERING (CLEAN ROOM) OPERATOR

Clacton-on-Sea, Essex, UK

Salary negotiable depending on experience.
Permanent, full time position: 40hr week + Pension.  In-house training.

Details of role:  To set and operate Veneering Machines within our Skived Film Section, Semi-Finished Department at Ford Road, Clacton-on-Sea, Essex.  

Main duties:

• To ensure all raw materials are correctly requisitioned and prepared prior to use

• Set/Operate Veneering Machine in accordance with manufacturing instructions

• Clean all tooling directly after use and return it to the allocated safe storage area

• Ensure the Clean Room is kept clean at all times to prevent product contamination

• Ensure that all external areas are kept clean, tidy and unobstructed at all times

• To strictly observe all Departmental Procedures and applicable Working Practices

• To cut, weigh, record and store waste PTFE materials in readiness for re-cycling

Key skills:  Ideally you will have some previous experience in process engineering, be reliable with an eye to detail and conformity to following safety standard processes. You’ll ensure the continual and efficient running of production.  This role will require you to work periods of time autonomously and, enclosed in a clean room environment under strict clothing and clean room procedures.  

If you are interested: Email your CV and covering letter to: steven.holden@dalau.com

______________________________________________________________________________

MOULDING PRESS OPERATOR

Clacton-on-Sea, Essex, UK

Salary negotiable depending on experience.
Permanent, full time position: 40hr week + Pension.  In-house training. 

Details of role:  We are offering a position for a Moulding Press Operator to work within our Semi-Finished Department at Ford Road, Clacton-on-Sea, Essex. 

Main duties:

• Ensure that all raw materials are correctly stored and pre-conditioned prior to use

• To set/operate the Moulding Presses in accordance with the manufacturing instructions

• To load and set running the sintering ovens, then unload upon completion of the program

• To clean all tooling directly after use and return it to the allocated safe storage area

• Ensure the Press Rooms are kept clean at all times to prevent product contamination

• To ensure that all external areas are kept clean, tidy and unobstructed at all times

• To strictly observe all Departmental Procedures and applicable Working Practices

Key skills:  Ideally you will have some previous experience in process engineering be reliable and want to work within a manufacturing environment.  This is a physically demanding role. 

If you are interested: Email your CV and covering letter to: steven.holden@dalau.com

______________________________________________________________________________

GRINDING OPERATOR

Clacton-on-Sea, Essex, UK

Salary negotiable depending on experience.
Permanent, full time position: 40hr week + Pension.  In-house training. 

Details of role:  We are offering a position for a Grinding Operator to work within our Semi-Finished Department at Ford Road, Clacton-on-Sea, Essex. 

Main duties:
• Ensure that all raw materials are correctly requisitioned and prepared prior to use

• To set/operate the Grinding Machines in accordance with the manufacturing instructions

• To perform the other subsequent operations of tapering, chamfering and sleeving

• Ensure that all external areas are kept clean, tidy and unobstructed at all times

• To strictly observe all Departmental Procedures and applicable Working Practices

• To cover for the Extrusion Operators when required

• To cut, weigh, record and store waste PTFE materials in readiness for re-cycling

Key skills:  Ideally you will have some previous experience in process engineering, be reliable and want to work within a manufacturing environment.  You will have a keen eye and an attention to detail as accuracy of data input is a requirement in this role. Being a team player is also essential since all tasks will require close collaboration with co-workers.

If you are interested: Email your CV and covering letter to: steven.holden@dalau.com

______________________________________________________________________________

TECHNICAL ESTIMATING ENGINEER 

Clacton-on-Sea, Essex, UK

Salary negotiable depending on experience, Relocation package also negotiable for the right person.

Permanent, full time position: 37½hr week + Pension. In-house training on planning and sourcing software. 

Details of role: We are looking for an experienced Estimator with a intermediate level of qualified engineering skills. You will be responsible for estimating the true costs of individual components and assemblies machined from various fluoropolymer materials, and have the confidence to deliver to spec, quotes for large quantities and complex assemblies. You will have an eye for detail, be able to define machining specifications and manufacturing methods and implement production to the planned timescale. You will be working closely with our Sales Team.

Duties:

• Costings and provision of quotations for sales purpose
• Define machining specifications and manufacturing methods
• Timely provision of material and tooling
• Participate in Continuous Improvements Programmes
• Define and maintain engineering master set-up instructions

Key skills: We are looking for a person that can think a process through, use their own initiative to research and propose cost effective solutions and implement confidently, and to deadline.   For the ideal candidate this will develop into a Project Management role and will hold the responsibility of supporting the Product Manager ǀ Machined Components.

If you are interested: Email your CV and covering letter to: lee.collar@dalau.com 

_____________________________________________________________________________ 

PROGRAMMER/SETTER - CNC SWISS SLIDING HEAD LATHE SECTION ǀ CNC DEPARTMENT

Clacton-on-Sea, Essex, UK

Salary negotiable depending on experience.
Permanent, full time position: 40hr week + Pension.  In-house training.

Details of role: This new position will be involved in various tasks. It will be necessary to be flexible with skills and be willing to move around the section to keep up with demand. Everyone within the workshop works as a team and most people are multi-skilled.

Reporting to the Workshop Supervisor, your key responsibilities will include (but are not limited to) being responsible for specific parts, setting of CNC machines, operation of machines, and general factory duties. You will set and program Sliding Head Stock, Swiss Style machines and Tornos Deco & Citizen L20 machines.

Duties:

  • High attention to detail and technical drawing knowledge
  • Excellent communications skills (verbal and written)
  • Machine setting and operation experience
  • TB Deco & Citizen Wizard experience
  • Be versatile to undertake various task in a day

Key skills: It is essential to be experienced in setting and programing sliding head lathes and to have worked in a manufacturing industry before to be able to demonstrate a high level of competency in this area of expertise. 

If you are interested: Email your CV and covering letter to: lee.collar@dalau.com

______________________________________________________________________________

 

0.19265413284302